BEIDE7.5KW 1TL0001 Cast Iron Three-phase Asynchronous Motor

BEIDE7.5KW 1TL0001 Cast Iron Three-phase Asynchronous Motor

Get Latest Price

Payment Type:	L/C,T/T
Incoterm:	FOB,CIF
Transportation:	Ocean
Port:	shanghai

Contact Now

Product Description

Product Attributes

Packaging & Delivery

Product Description

Product Attributes

Brand: Beide

Application:: chemical and petrochemical industries, etc.

Rated Power:: 0.55 ~ 90 kW

Frame Size: 80 ~ 280

Voltage And Frequency:: Supports multiple voltages and frequencies

Cooling Method:: IC411

Insulation System:: Class F

Altitude:: no more than 1000 meters

Protection Class:: IP65

Packaging & Delivery

Selling Units	:	Piece/Pieces
Download	:

The file is encrypted. Please fill in the following information to continue accessing it

Product Description

7.5KW 1TL0001 Cast Iron Asynchronous Motor

At rated output with converter fed operation, the motors will be used in temperature class 155 (F). To prevent damage
as a result of bearing currents, insulated bearings are recommended to be assembled for frame size 250 and above. Please inquire Siemens about the detailed information of insulated bearing.
By usage with admissible torque and below, the motor can be operated with self cooling; by usage over the admissible torque line, the motor with forced ventilation is needed.
7.5KW 1TL0001 Three-Phase Asynchronous Motor,At operating speeds above rated speed the noise and vibration levels increase and the bearing life time reduce. Attention should be paid to the re-greasing intervals and the grease service life.

1TL0001 Cast Iron series Low-voltage Three-phase Asynchronous Motor

Cast iron housing motor

Rated output：0.55 ~ 315 kW Frame size：80 ~ 355
Voltage and Frequency：support multiple voltage and
frequency
Cooling method：IC411
Oiling device：FS180~355 motor as standard Degree of protection：IP55
Degree of insulation：F
Coolant temperature：-15 ~ 40 ºC
Site altitude above see level：not exceed 1000 m
1TL0 series of motors owns the features of high efﬁciency, novel structure, beautiful appearance, low noise, small vibration, high degree of insulation, etc, also can be used in the ﬁelds of fans, pump, compressors and textile machine. The content in this catalogue only be suitable for continuous duty operation(S1), IC416 or IC418 cooling method or under 60Hz.

Company Profile
1TL0001 Cast Iron Three-phase Asynchronous Motor

Siemens Standard Motors Ltd. (SSML)

Siemens Standard Motors Ltd. (SSML) is a Siemens-owned company in China. SSML is located in Yizheng City, Jiangsu Province. The company focuses on developing and producing small and medium low-voltage motors. Currently, SSML mainly produce Siemens brand low voltage AC Motors according to IEC standards, and Beide brand Low Voltage Motors designed according to China local standards.

As one of Siemens main low-voltage motor production facilities worldwide, SSML uses the knowledge and experience of more than 100 years in motor design and manufacturing, owns the advanced manufacture equipment and process, adopts the SIEMENS modern management model , and implements comprehensive quality control according to ISO9001 2015. SSML will continuously serve customers with high quality products and good service.

1TL0001 Cast Iron Three-phase Asynchronous Motor

Construction and mounting type

1) At outdoor application, the using of protective cover (Option code H00) is recommended
2) At out door application the protection of shaft again jet-water is recommended
3) Full circle ﬂange as standard conﬁguration in this type mounting.

Bearing system

1TL0001 series motors are supplied with the ball bearing as standard. These bearings are either of the sealed or regreasable type.
For FS80 ~ 160, the ﬂoating bearings are assembled; for FS180 ~ 355, ﬂoating bearing at DE, and ﬁxed bearing at NDE assembled.
The standard bearing can endure a maximum cantilever force, the increased cantilever bearing design (Option code: L22) should be considered.

Bearing Assignment

Frame size	Pole	Standard design			Increased cantilever-bearing (Option code:L22)
		DE bearing	NDE bearing (Horizontal mounting)	NDE bearing (Vertical mounting)	DE bearing	NDE bearing (Horizontal mounting)	NDE bearing (Vertical mounting)
80	2, 4, 6	6204 2RZ C3	6204 2RZ C3	6204 2RZ C3	－	－	－
90	2, 4, 6	6205 2RZ C3	6205 2RZ C3	6205 2RZ C3	－	－	－
100	2, 4, 6	6206 2RZ C3	6206 2RZ C3	6206 2RZ C3	6306 2RZ C3	6206 2RZ C3	6206 2RZ C3
112	2, 4, 6	6206 2RZ C3	6206 2RZ C3	6206 2RZ C3	6306 2RZ C3	6206 2RZ C3	6206 2RZ C3
132	2, 4, 6, 8	6208 2RZ C3	6208 2RZ C3	6208 2RZ C3	6308 2RZ C3	6208 2RZ C3	6208 2RZ C3
160	2	6309 2RZ C3	6209 2RZ C3	6209 2RZ C3	－	－	－
	4, 6, 8
180	2	6310 C3	6210 C3	6210 C3	NU310	6210 C3	6210 C3
	4, 6, 8
200	2	6312 C3	6212 C3	6212 C3	NU312	6212 C3	6212 C3
	4, 6, 8
225	2	6313 C3	6213 C3	6213 C3	NU313	6213 C3	6213 C3
	4, 6, 8
250	2	6314 C3	6215 C3	7215	NU314	6213 C3	O.R.
	4, 6, 8
280	2, 4, 6, 8	6317 C3	6217 C3	7217	NU317	6217 C3	O.R.
315	2	6319 C3	6317 C3	7317	NU319	6317 C3	O.R.
	4, 6, 8	6319 C3	6319 C3	7319		6319 C3
355	2	6319 C3	6319 C3	7319	NU319	6319 C3	O.R.
	4, 6, 8	6322 C3	6322 C3	7322	NU322	6322 C3	O.R.

Note: DE Driven end
NDE Non driven end
－Not possible
O.R. Possible on request

Grease life and re-greasing interval

For permanent lubrication, the bearing grease lifetime is matched to the bearing lifetime. This can, however, only be achieved if the motor is operated in accordance with the catalog speciﬁcations.

For motors which can be regreased at deﬁned regreasing intervals, the bearing lifetime can be extended and/or unfavorable factors such as temperature, mounting conditions, speed, bearing size and mechanical load can be compensated.

Grease life (Horizontal installation）

Frame size	Poles	Grease lifetime up to CT 40 ºC 1)
Grease for permanent lubrication bearing
80 ~ 160	2，4，6，8	20000 或（or） 40000 2）
Grease for regreasable bearing
180 ~ 250	2	4000 （h）
180 ~ 250	4，6，8	8000 （h）
280 ~ 315	2	3000 （h）
280 ~ 315	4，6，8	5000 （h）
355	2	2000 （h）
355	4，6，8	4000 （h）

Note:
1) If the coolant temperature is increased by 10 K, the grease lifetime and regreasing interval are halved.
2) 40000 h apply to horizontally installed motors with coupling output without additional axial loads.

■When motor runs beyond the rated speed, the increase of motor vibration will result in the extra radial and axial force on bearing. This will reduce the life of bearing;
■When the motor vibration increase due to the environment
or other equipment, the bearing also will endure more radial and axial force. This also will reduce the life of bearing;
■If the coolant temperature is increased by 10 ºC, the grease lifetime and regreasing interval is halved.

Connection boxes technical data

Frame size	Contact screw thread	Outer cable diameter (sealing range)	Cable entry size
80 ~ 100	M4	10～14	M24 x 1.5
112 ~ 132	M5	13～18	M27 x 2 + M27 x 2
160 ~ 180	M5	18～25	M36 x 2 + M36 x 2
200 ~ 225	M8	22～32	M48 x 2 + M48 x 2
250	M10	37～44	M64 x 2 + M64 x 2
280	M10
315	M12
355	M16	38～47	M72 x 2 + M72 x 2

Vibration
1TL0001 rotors are dynamically balanced to severity grade A using a half key.
Table below contains the effective vibration values for unloaded motors.

Vibration Grade	Frame size (mm)	56 ≤ FS ≤ 132		H>132
	Mounting	Vibration displacement/um	Vibration velocity/(mm/s)	Vibration displacement/um	Vibration velocity/(mm/s)
A	Free suspension	45	2.8	45	2.8
	Rigid mounting	-	-	37	2.3
					2.81)
B	Free suspension	18	1.1	29	1.8
	Rigid mounting	-	-	24	1.5
					1.81)

Note:
1） The level are vibration velocity limit when the twice line frequency vibration level is dominant deﬁned by GB/T 10068-2020, for 2p motors that frame size bigger than 132mm.

Anti-condensation heater
Motors whose windings are at risk of condensation due to the climatic conditions, e.g. inactive motors in humid
atmospheres or motors that are subjected to widely ﬂuctuating temperatures can be equipped with anti-condensation heaters (Option code: Q04),
2 auxiliary terminals in connection box are needed.” Anti-condensation heaters must be switched off during operation. When motor shut down, the heaters must be switched on.

Electrical data of Anti-condensation heater

Frame size	Power（W）	Voltage（V）
80 ~ 90	20	220
100 ~ 112	30	220
132 ~ 160	40	220
180 ~ 200	50	220
225 ~ 280	60	220
315	80	220
355	100	220

Electro-Magnetic Brake
Disc type DC electro-magnetic brake can be attached to the 1TL0001 series of motors, the motors are suitable for all kinds of machines which require fast stop, accurate positioning and reciprocating operation.
1TL0001 Cast Iron Three-phase Asynchronous Motor

1TL0001 Cast Iron Three-phase Asynchronous Motor

The technical data for the brakes

Frame size	(Nm) Static braking torque	(s) No-load braking time	(V) Brake voltage when switch is on the DC side	(W) Excitation power	ΔL1 (mm)
80	8	0.2	99	50	70
90	15	0.2	99	60	75
100	30	0.2	99	80	75
112	40	0.25	170	110	75
132	80	0.25	170	130	85
160	150	0.35	170	150	105
180	200	0.35	170	150	100
200	300	0.45	170	200	125
225	450	0.45	170	200	140

Electrical design

Rated Output
1TL0001 motors rated output powers means that the motor runs under continuous duty S1 (IEC 60034 - 1) operation when operated at ambient temperature from -15 ºC to 40 ºC and at altitudes of up to 1000 m over sea.
Voltage and Frequency
IEC 60034-1 differentiates between Category A (combination of voltage deviation ±5 % and frequency deviation ±2
%) and Category B (combination of voltage deviation
±10 % and frequency deviation +3 % / -5 %) for voltage and frequency ﬂuctuations. The motors can supply their rated torque in both Category A and B. In Category A, the temperature rise is approximately 10 K higher than during normal operation.

Standard 60034 - 1	Category A	Category B
Voltage deviation	±5 %	±10 %
Frequency deviation	±2 %	+3 % / -5 %
According to the standard, longer operation is not recommended for Category B.

Tolerance for electrical data
■Efﬁciencyηat
Prated ≤ 150 kW: - 0.15 x (1 – η) Prated > 150 kW: - 0.10 x (1 – η) With η being a decimal number
■Power factor - (1 – cosφ) / 6 Minimum absolute value: 0.02 Maximum absolute value: 0.07
■Slip ±20 % (for motors < 1 kW ±30 % is admissible)
■Locked-rotor current +20 %
■Locked-rotor torque -15 % to +25 %
■Breakdown torque -10 %
■Moment of inertia ±10 %

Converter fed application

1TL0001 motors are suitable for pumps, fans, compressors, texitle machine and mechanical machine applications where variable or constant speed is required.
The standard insulation of the 1TL0001 motors is designed such that operation is possible on the converter at mains voltage up to 460 V.
1TL0001 motors are capable for converter-fed operation with certain characteristics load, of which the load torque characteristics is referred in the following diagram:

1TL0001 Cast Iron Three-phase Asynchronous Motor

At rated output with converter fed operation, the motors will be used in temperature class 155 (F). To prevent damage
as a result of bearing currents, insulated bearings are recommended to be assembled for frame size 250 and above. Please inquire Siemens about the detailed information of insulated bearing.
By usage with admissible torque and below, the motor can be operated with self cooling; by usage over the admissible torque line, the motor with forced ventilation is needed.

At operating speeds above rated speed the noise and vibration levels increase and the bearing life time reduce. Attention should be paid to the re-greasing intervals and the grease service life.

The allowed maximum safe operating speed of 1TL0001 motors shows the diagram

Frame size	2 极 2 pole		4 极 4 pole		6 pole		8 pole
Frame size	Max.rpm	fmax	Max.rpm	fmax	Max.rpm	fmax	Max.rpm	fmax
80	5200	87	3600	120	2400	120	1800	120
90	5200	87	3600	120	2400	120	1800	120
100	5200	87	3600	120	2400	120	1800	120
112	5200	87	3600	120	2400	120	1800	120
132	4500	75	2700	90	2400	120	1800	120
160	4500	75	2700	90	2400	120	1800	120
180	4500	75	2700	90	2400	120	1800	120
200	4500	75	2300	77	1800	90	1400	93
225	3600	60	2300	77	1800	90	1400	93
250	3600	60	2300	77	1800	90	1400	93
280	3600	60	2300	77	1800	90	1400	93
315	3600	60	2300	77	1800	90	1400	93
355	3600	60	2300	77	1800	90	1400	93

Technical data for separately fan

Motor frame size	rated voltage	Rated frequency	Rated output	Current	Speed	ΔL
80	220D/380Y	50	30	0.14/0.08	2800	60
90		50	30	0.14/0.08	2800	75
100		50	52	0.21/0.12	2800	65
112		50	52	0.21/0.12	2800	75
132		50	45	0.35/0.2	1400	75
160		50	45	0.35/0.2	1400	45
180		50	120	1.04/0.6	1400	55
200		50	120	1.04/0.6	1400	60
225		50	120	1.04/0.6	1400	60
250		50	230	1.73/1.0	1400	60
280		50	230	1.73/1.0	1400	105
315		50	370	1.91/1.1	1250	95
355		50	550	2.18/1.26	1350	100

Note: The fan can be running with supply 210 ~ 240VD/360 ~ 420VY 50Hz, and also 220 ~ 260VD/380 ~ 480VY 60Hz. Other voltage supply, possible on request.

Technical data for fan motor

For some special application with external cooling facility, we can provide motor without fan and fan cover, the option code is F90. When motor without fan and fan cover, the length will decrease ∆ l.

motor frame size	Δl Length decrease of motor Δl
80	50
90	55
100	65
112	65
132	70
160	90
180	105
200	110
225	115
250	125
280	135
315	175
355	165

Technical data table

Cast Iron Motors

Frame Size	Rate Output 50 Hz	Order No.	Rated Speed	Efﬁciency at (50 HZ) 4/4 load	Efﬁciency at (50 HZ) 3/4 load	Power factor	Rated current	Rated torque	Starting current /Rated current	Starting torque/ Rated torque	Max torque / Rated torque	Moment of Inertia	IMB3 Weight
Frame Size	kW	Order No.	rpm	%	%		A	Nm	Direct start to rated torque (current) multiples			kgm²	kg
		3000rpm 2-pole
		220VD / 380VY 50HZ
80M	0.75	1TL0001-0DA22-1 □□□	2795	77.4	78.5	0.84	1.75	2.6	5.6	2.4	2.4	0.00080	13.5
80M	1.1	1TL0001-0DA32-1 □□□	2835	79.6	80.6	0.84	2.50	3.7	6	2.8	3.2	0.0012	15.0
90S	1.5	1TL0001-0EA02-1 □□□	2890	81.3	81.7	0.84	3.35	5.0	6.5	2.4	3.1	0.0021	19.0
90L	2.2	1TL0001-0EA42-1 □□□	2890	83.2	83.7	0.85	4.75	7.3	7.2	2.6	3.5	0.0026	23
100L	3	1TL0001-1AA42-1 □□□	2885	84.6	85.1	0.84	6.4	9.9	7.5	4	4.5	0.0036	30
		3000rpm 2-pole
		380VD / 660VY 50HZ
112M	4	1TL0001-1BA23-3 □□□	2930	85.8	86.6	0.86	8.2	13.0	7.5	2.2	2.9	0.0064	37
132S	5.5	1TL0001-1CA03-3 □□□	2930	87	87.6	0.87	11.0	17.9	7.5	2.2	2.9	0.014	54
132S	7.5	1TL0001-1CA13-3 □□□	2930	88.1	88.8	0.89	14.5	24.4	7.5	2.3	2.9	0.017	59
160M	11	1TL0001-1DA23-3 □□□	2935	89.4	90.1	0.86	21.5	35.8	7.5	2.2	2.9	0.031	93
160M	15	1TL0001-1DA33-3 □□□	2935	90.3	91	0.86	29.5	48.8	7.5	2.4	3.2	0.038	103
160L	18.5	1TL0001-1DA43-3 □□□	2935	90.9	91.7	0.89	34.5	60.2	7.5	2.4	3.2	0.046	118
180M	22	1TL0001-1EA23-3 □□□	2935	91.3	91.8	0.87	42.0	71.6	7.6	2.5	3.2	0.072	151
200L	30	1TL0001-2AA43-3 □□□	2955	92	92.3	0.86	58	97.0	7.5	2.5	3.2	0.13	215
200L	37	1TL0001-2AA53-3 □□□	2955	92.5	92.8	0.88	69	119.6	7.5	2.5	3.2	0.15	240
225M	45	1TL0001-2BA23-3 □□□	2965	92.9	93.1	0.88	84	144.9	7.9	2.5	3.1	0.24	277
250M	55	1TL0001-2CA23-3 □□□	2970	93.2	93.2	0.88	102	176.9	7.5	2.5	3	0.42	309
280S	75	1TL0001-2DA03-3 □□□	2975	93.8	93.8	0.87	140	240.8	7.5	2.8	3	0.75	440
280M	90	1TL0001-2DA23-3 □□□	2978	94.1	94.1	0.87	167	288.6	7.5	3	3.1	0.88	520
315S	110	1TL0001-3AA03-3 □□□	2982	94.3	94.3	0.90	197	352.3	7.5	2.2	2.6	1.4	750
315M	132	1TL0001-3AA23-3 □□□	2982	94.6	94.6	0.91	235	422.7	7.5	2.3	2.9	1.7	905
315L	160	1TL0001-3AA53-3 □□□	2982	94.8	95.1	0.92	280	512.4	7.5	2.5	2.8	1.9	945
315L	185	1TL0001-3AA63-3 □□□	2982	95	95.3	0.92	320	592.5	7.5	2.5	2.8	2.3	1060
315L	200	1TL0001-3AA73-3 □□□	2982	95	95.3	0.92	350	640.5	7.5	2.5	2.8	2.3	1070
355M	220	1TL0001-3BA23-3 □□□	2985	95.0	94.7	0.90	390	704	7.0	2.0	2.6	2.5	1400
355M	250	1TL0001-3BA33-3 □□□	2985	95.0	94.7	0.90	445	800	7.4	2.3	2.8	2.7	1460
355L	280	1TL0001-3BA53-3 □□□	2985	95.0	95.1	0.91	490	896	7.0	2.2	2.6	3.0	1540
355L	315	1TL0001-3BA63-3 □□□	2985	95.0	95.0	0.91	550	1008	7.4	2.5	2.8	3.3	1670

Note: 1) About the code of other voltage and frequency, winding protection and connection box position, please refer to Orde No. in page 14.
2) Noise value is only applicable to the direct power supply of the motor in 50Hz power supply and the condition of no-load operation, the tolerance is +3dB. Only suitable for cooling method IC416(Option code F70), IC418(Option code F70) motor.

Technical data table
Cast Iron Motors

Frame Size	Rate Output 50 Hz	Order No.	Rated Speed	Efﬁciency at (50 HZ) 4/4 load	Efﬁciency at (50 HZ) 3/4 load	Power factor	Rated current	Rated torque	Starting current /Rated current	Starting torque/ Rated torque	Max torque / Rated torque	Moment of Inertia	IMB3 Weight
Frame Size	kW	Order No.	rpm	%	%		A	Nm	Direct start to rated torque (current) multiples			kgm²	kg
		1500rpm 4-pole
		220VD / 380VY 50HZ
80M	0.55	1TL0001-0DB22-1 □□□	1425	74.0	74.7	0.8	1.40	3.7	6	2	2.7	0.0021	14.0
80M	0.75	1TL0001-0DB32-1 □□□	1440	79.6	79.6	0.75	1.90	5.0	6.5	2.8	3.5	0.0027	15.5
90S	1.1	1TL0001-0EB02-1 □□□	1440	81.4	81.4	0.75	2.75	7.3	7	2.8	3.5	0.0041	20
90L	1.5	1TL0001-0EB42-1 □□□	1435	82.8	82.8	0.76	3.60	9.9	7	3	3.8	0.0047	23
100L	2.2	1TL0001-1AB42-1 □□□	1435	84.3	85	0.79	5.0	14.6	7	3	3.2	0.0081	30
100L	3	1TL0001-1AB52-1 □□□	1435	85.5	86.3	0.79	6.7	20.0	7	3	3.2	0.010	33
		1500rpm 4-pole
		380VD / 660VY 50HZ
112M	4	1TL0001-1BB23-3 □□□	1445	86.6	87.1	0.79	8.9	26.4	7.1	2.7	3.1	0.011	42
132S	5.5	1TL0001-1CB03-3 □□□	1460	87.7	88.2	0.79	12.1	36.0	7.5	2.5	3.1	0.021	58
132M	7.5	1TL0001-1CB23-3 □□□	1460	88.7	89.4	0.82	15.7	49.1	7.7	2.7	3.2	0.029	72
160M	11	1TL0001-1DB23-3 □□□	1465	89.8	90.4	0.84	22.0	71.7	7.5	2.5	3.1	0.051	99
160L	15	1TL0001-1DB43-3 □□□	1465	90.6	91.3	0.85	29.5	97.8	7.8	2.7	3.2	0.066	120
180M	18.5	1TL0001-1EB23-3 □□□	1465	91.2	91.8	0.85	36.5	120.6	7.3	2.5	3.2	0.13	163
180L	22	1TL0001-1EB43-3 □□□	1465	91.6	92.3	0.85	43.0	143.4	7.3	2.4	3.2	0.14	182
200L	30	1TL0001-2AB43-3 □□□	1470	92.3	92.9	0.85	58	194.9	7.3	2.7	3.2	0.22	227
225S	37	1TL0001-2BB03-3 □□□	1475	92.7	93.2	0.86	71	239.6	7.3	2.7	3.2	0.45	262
225M	45	1TL0001-2BB23-3 □□□	1475	93.1	93.5	0.87	84	291.4	7.3	2.7	3.2	0.51	284
250M	55	1TL0001-2CB23-3 □□□	1480	93.5	93.9	0.86	104	354.9	7.5	3.1	3.5	0.80	330
280S	75	1TL0001-2DB03-3 □□□	1485	94	94.3	0.87	139	482.3	7.5	2.7	3.1	1.4	480
280M	90	1TL0001-2DB23-3 □□□	1485	94.2	94.3	0.87	167	578.8	7.5	2.7	3.1	1.5	555
315S	110	1TL0001-3AB03-3 □□□	1488	94.5	94.5	0.86	205	706.0	7.3	2.8	2.9	2.2	750
315M	132	1TL0001-3AB23-3 □□□	1486	94.7	94.7	0.88	240	848.3	7.3	2.5	2.7	2.5	880
315L	160	1TL0001-3AB53-3 □□□	1488	94.9	94.9	0.88	290	1026.9	7.4	3	2.9	3.0	965
315L	185	1TL0001-3AB63-3 □□□	1488	95.1	95.1	0.88	335	1187.3	7.4	3	3	3.6	1060
315L	200	1TL0001-3AB73-3 □□□	1488	95.1	95.1	0.88	365	1283.6	7.4	3	3	3.7	1080
355M	220	1TL0001-3BB23-3 □□□	1490	95.1	95.2	0.89	395	1411	6.9	1.7	2.5	4.9	1580
355M	250	1TL0001-3BB33-3 □□□	1490	95.1	95.2	0.89	450	1604	6.9	1.8	2.5	5.0	1630
355L	280	1TL0001-3BB53-3 □□□	1490	95.1	95.3	0.89	500	1795	7.0	1.9	2.7	5.3	1680
355L	315	1TL0001-3BB63-3 □□□	1490	95.1	95.2	0.89	570	2019	7.0	1.9	2.7	5.7	1760

Technical data table
Cast Iron Motors

Frame Size	Rate Output 50 Hz	Order No.	Rated Speed	Efﬁciency at (50 HZ) 4/4 load	Efﬁciency at (50 HZ) 3/4 load	Power factor	Rated current	Rated torque	Starting current /Rated current	Starting torque/ Rated torque	Max torque / Rated torque	Moment of Inertia	IMB3 Weight
Frame Size	kW	Order No.	rpm	%	%		A	Nm	Direct start to rated torque (current) multiples			kgm²	kg
		1000rpm 6-pole
		220VD / 380VY 50HZ
80M	0.55	1TL0001-0DC32-1 □□□	895	71	72	0.76	1.55	5.9	4.5	2.3	2.3	0.0028	16.0
90S	0.75	1TL0001-0EC02-1 □□□	935	75.9	76.5	0.71	2.10	7.7	5	2.1	2.6	0.0038	20
90L	1.1	1TL0001-0EC42-1 □□□	945	78.1	78.1	0.71	3.00	11.1	5.5	2.4	2.8	0.0046	24
100L	1.5	1TL0001-1AC42-1 □□□	945	79.8	80.1	0.74	3.85	15.2	5.5	2.4	2.9	0.0086	31
112M	2.2	1TL0001-1BC22-1 □□□	950	81.8	82.5	0.73	5.6	22.1	5.5	2.6	3.3	0.012	41
132S	3	1TL0001-1CC02-1 □□□	960	83.3	84.3	0.73	7.5	29.8	6	2	2.2	0.019	54
		1000rpm 6-pole
		380VD / 660VY 50HZ
132M	4	1TL0001-1CC23-3 □□□	960	84.6	85.4	0.73	9.8	39.8	6.2	2.2	2.5	0.024	65
132M	5.5	1TL0001-1CC33-3 □□□	960	86	86.6	0.75	13.0	54.7	6.4	2.4	2.6	0.031	73
160M	7.5	1TL0001-1DC23-3 □□□	975	87.2	87.9	0.77	17.0	73.5	6.4	2.1	2.6	0.1069	103
160L	11	1TL0001-1DC43-3 □□□	975	88.7	89.4	0.78	24.0	108	6.4	2.1	2.6	0.14	120
180L	15	1TL0001-1EC43-3 □□□	975	89.7	90.4	0.78	32.5	146.9	6.5	2.3	3	0.18	163
200L	18.5	1TL0001-2AC43-3 □□□	975	90.4	91	0.81	38.5	181.2	6.5	2.3	2.8	0.27	210
200L	22	1TL0001-2AC53-3 □□□	975	90.9	91.4	0.82	45.0	215.5	6.5	2.3	2.8	0.32	228
225M	30	1TL0001-2BC23-3 □□□	980	91.7	92.3	0.83	60	292.3	6.5	2.2	2.8	0.62	282
250M	37	1TL0001-2CC23-3 □□□	982	92.2	92.8	0.83	73	359.8	7	2.5	2.8	0.91	332
280S	45	1TL0001-2DC03-3 □□□	985	92.7	93.3	0.85	87	436.3	7.5	2.5	2.8	1.2	410
280M	55	1TL0001-2DC23-3 □□□	986	93.1	93.7	0.85	106	532.7	7.5	2.5	2,8	1.5	485
315S	75	1TL0001-3AC03-3 □□□	986	93.7	94.3	0.85	143	726.4	7.3	2.3	2.8	2.3	690
315M	90	1TL0001-3AC23-3 □□□	986	94	94.5	0.85	171	871.7	7.3	2.3	2.8	2.8	830
315L	110	1TL0001-3AC53-3 □□□	988	94.3	94.7	0.86	205	1063.3	7.5	2.4	2.8	3.9	965
315L	132	1TL0001-3AC63-3 □□□	988	94.6	95	0.86	245	1275.9	7.5	2.5	3	4.3	1010
355M	160	1TL0001-3BC23-3 □□□	991	94.8	95.4	0.87	295	1542	7.0	2.4	2.2	8.9	1610
355M	185	1TL0001-3BC33-3 □□□	991	95.0	95.5	0.87	340	1783	7.1	2.6	2.6	9.4	1750
355M	200	1TL0001-3BC43-3 □□□	991	95.0	95.5	0.87	370	1930	7.1	2.6	2.6	10.5	1750
355L	220	1TL0001-3BC53-3 □□□	991	95.0	95.5	0.87	405	2121	7.6	2.6	2.6	11.5	1850
355L	250	1TL0001-3BC63-3 □□□	992	95.0	95.4	0.87	460	2408	7.8	2.8	2.7	12.9	1930

Note:
1) About the code of other voltage and frequency, winding protection and connection box position, please refer to Orde No. in page 14.
2) Noise value is only applicable to the direct power supply of the motor in 50Hz power supply and the condition of no-load operation, the tolerance is +3dB. Only suitable for cooling method IC416(Option code F70), IC418(Option code F70) motor.

Technical data table

Cast Iron Motors

Frame Size	Rate Output 50 Hz	Order No.	Rated Speed	Efﬁciency at (50 HZ) 4/4 load	Efﬁciency at (50 HZ) 3/4 load	Power factor	Rated current	Rated torque	Starting current /Rated current	Starting torque/ Rated torque	Max torque / Rated torque	Moment of Inertia	IMB3 Weight
Frame Size	kW	Order No.	rpm	%	%		A	Nm	Direct start to rated torque (current) multiples			kgm²	kg
		750rpm 8-pole
		220VD/380VY 50HZ
132S	2.2	1TL0001-1CD02-1 □□□	725	77.6	78.3	0.70	6.2	29.2	4.6	1.9	3	0.022	79
132M	3	1TL0001-1CD22-1 □□□	720	80.0	80.3	0.75	7.6	40	4.8	2	3	0.037	79
		750rpm 8-pole
		380VD/660VY 50HZ
160M	4	1TL0001-1DD23-3 □□□	730	81.9	82.1	0.66	11.2	52	4.9	1.8	2.8	0.051	97
160M	5.5	1TL0001-1DD33-3 □□□	720	83.8	84.1	0.68	14.7	73	4.6	1.5	2.0	0.051	105
160L	7.5	1TL0001-1DD43-3 □□□	730	85.3	85.5	0.67	19.9	99	5	1.7	2.3	0.067	121
180L	11	1TL0001-1ED43-3 □□□	715	86.9	87.2	0.75	25.5	147	5	2.1	2.6	0.20	163
200L	15	1TL0001-2AD53-3 □□□	715	88.0	88.1	0.78	33.0	200	6	2.3	2.9	0.35	233
225S	18.5	1TL0001-2BD03-3 □□□	729	88.6	88.9	0.77	41.0	240	6.6	2.4	3	0.48	246
225M	22	1TL0001-2BD23-3 □□□	728	89.1	89.4	0.79	47.5	290	7	2.7	2.8	0.56	286
250M	30	1TL0001-2CD23-3 □□□	732	89.8	90.0	0.81	63	390	6.3	2.2	2.7	0.94	330
280S	37	1TL0001-2DD03-3 □□□	736	90.3	90.4	0.78	80	480	6.5	2.5	2.7	1.2	395
280M	45	1TL0001-2DD23-3 □□□	738	90.7	90.8	0.79	94	582	6.3	2.2	2.7	1.5	479
315S	55	1TL0001-3AD03-3 □□□	740	91.0	91.1	0.81	113	710	6.2	2	2.9	2.1	665
315M	75	1TL0001-3AD23-3 □□□	738	91.6	92.1	0.81	154	970	6.7	2.2	2.5	2.6	845
315L	90	1TL0001-3AD53-3 □□□	738	91.9	92.5	0.83	179	1165	5.9	1.8	2.3	3.3	890
315L	110	1TL0001-3AD63-3 □□□	741	92.3	92.6	0.83	220	1418	7.1	2.3	3	4.2	1040
355M	132	1TL0001-3BD23-3 □□□	743	92.6	93.2	0.81	265	1699	7.1	2.2	2.4	8.2	1530
355M	160	1TL0001-3BD33-3 □□□	742	93.0	93.5	0.82	320	2059	7.1	2.2	2.4	9.6	1650
355L	185	1TL0001-3BD53-3 □□□	742	93.3	93.9	0.84	360	2382	7.1	2.0	2.1	11.4	1820
355L	200	1TL0001-3BD63-3 □□□	742	93.5	94.0	0.84	385	2576	7.4	2.0	2.1	12.7	1930

Note:

1) About the code of other voltage and frequency, winding protection and connection box position, please refer to Orde No. in page 14.

2) Noise value is only applicable to the direct power supply of the motor in 50Hz power supply and the condition of no-load operation, the tolerance is +3dB. Only suitable for cooling method IC416(Option code F70), IC418(Option code F70) motor.

Options

Motor order code	Option Code	Description	Application Scope
Voltages and frequency
1TL0001- □□□□ 9-0 □□□ -Z	M2A2)17）	220VD/380VY 60Hz，50Hz power output	FS80 ~ 355
	M2B3)17）	380VD/660VY 60Hz，50Hz power output	FS80 ~ 355
	M2C2)17)	440VY 60Hz，50Hz power output	FS80 ~ 280
	M2D3)17）	440VD 60Hz，50Hz power output	FS80 ~ 355
	M2E2)17)	460VY 60Hz，50Hz power output	FS80 ~ 280
	M2F3)17）	460VD 60Hz，50Hz power output	FS80 ~ 355
Windings and insulation
－	N0118）	Temperature class 155 (F), used according to 155 (F), with service factor (SF1.15)	FS80 ~ 355
－	N10	Temperature class 180（H）	FS80 ~ 355
－	Q044）	Anti-condensation heater for 220 VAC (spaces heater)	FS80 ~ 355
Motor connection box
－	R10 5)	Rotation of the connection box through 90º, entry from DE	FS80 ~ 355
－	R11 6)	Rotation of the connection box through 90º, entry from NDE	FS80 ~ 355
－	R12	Rotation of the connection box through 180º	FS80 ~ 355
－	H04	external earthing	FS80 ~ 280
－	X07	cast iron connection box	FS80 ~ 355
－	X47	Connection boxes of the motors include 2 self-locking cable gland	FS112 ~ 355
Bearings
－	Q72	Installation of 2PT100 screw-in resistance thermometers for bearing	FS180 ~ 355
－	L80	SKF Bearing	FS80 ~ 355
－	L81	Other imported brand bearings	FS80 ~ 355
－	L20	Located bearing at DE	FS80 ~ 160
－	L227)	Increased cantilever forces	FS100 ~ 355
Mechanical design and degrees of protection
－	X178)9)	Second standard shaft extension	FS80 ~ 355
－	P8010)	Full circle ﬂange	FS80 ~ 315

1) Order No. supplement Z with option code when ordering.
2) Only applicable to the motor whose power is 3kW and below.
3) Only applicable to the motor whose power is 3kW and above.
4) When choose these options, the connection boxes will be changed to cast iron shell.
5) Not applicable to the FS80~10 ﬂange mounted motors, and can't be used with the option H08.
6) Not applicable to the outlet on top.
7） Cast iron motor exclude FS160.
8) H00、F70 can't be used with this option.
9) Second standard shaft extension on NDE is shown in the dimension drawings.
10) Not applicable to the FS180、200、225 and 280 motors, these motors include the full circle ﬂange.

Hot Products